Baby Jogger city go PD348959F Manual De Instrucciones página 23

BASE INSTALLATION - LATCH
3
4
4-20 lb (2-9 kg)
20-35 lb (9-16 kg)
5
6
3 Press the LATCH connectors onto the
adjacent vehicle anchors until a click
is heard. Pull the LATCH connector to
verify a secure lock.
4 Check the level indicator on the base.
The bubble must be completely within
the zone of your childs weight. For infants
weighing 4-20 lb (2-9 kg) the bubble
must rest within the light blue line . For
children weighing 20-35 lb (9-16 kg) the
bubble must rest within the dark blue
line. Adjust the recline foot if needed.
5 While pressing the base down into the
seat, pull up on the LATCH adjuster strap
to tighten. To loosen the LATCH adjuster
strap, press button on latch buckle and
pull.
6 Test For Tightness. Grab the sides of the
base where the seat belt is and push and
pull the base from side to side and front
to back. If the base moves less than 1"
(2.5 cm), it is tight enough.
23