Baby Jogger city go PD348959F Manual De Instrucciones página 35

SEAT INSTALLATION - LAP/SHOULDER BELT ALT
the
1
the
r to
the
ush
side
oves
h.
2
ase,
abel
at it
Before installing carrier, make sure vehicle
is on level ground. Place carrier on an
approved vehicle seat location.
1 Place the car seat rear-facing on the
vehicle seat. Route the lap portion of
the lap/shoulder belt through the lap
belt guides on both sides of carrier.
Make sure the belt lies flat and is not
twisted. Fasten the buckle until it clicks
into place.
2 Pull on shoulder portion toward the
retractor while pressing down on the
center of the carrier to tighten carrier to
vehicle seat.
35