Baby Jogger city go PD348959F Manual De Instrucciones página 30

BASE INSTALLATION - LAP BELT
7
CLICK
8
9
7 Place child restraint into the base. Push
down on the front of the child restraint
and handle, you will hear a click. Test to
make sure it is attached by pulling up on
the front corners of the child restraint.
8 Check the level indicator.
No te: If the foot is in the most raised
position and the bubble is out of the
zone of your childs weight you can
place a tightly rolled towel or pool
noodle under the front end of the base
to achieve the proper recline.
9 To remove the base, unlock the lock off
and unbuckle the seat belt and remove.
30