Establishing A Connection To A Network; Wlan Connection Via Wps - Medion P66024 Manual De Instrucciones

13.4. Establishing a connection to a network

The names (SSID) of the networks found are shown in a list. WLAN Access Points
that provide connections via WPA are indicated with [WPS].
Beneath this, you will see:
NEUER SUCHLAUF: start a new search
KABEL: search for networks via Ethernet
MANUELLE KONFIG: enter connection data manually
13.4.1. Connection via WLAN
 Select the WLAN Access Point for connection with the internet radio and press
the dial to confirm.
In case of an unencrypted (open) WLAN Access Point, the internet radio establishes
the connection automatically.
 To connect with an encrypted network, observe the following sections.

13.5. WLAN connection via WPS

Once a WLAN network providing the option to connect via WPS has been selected,
the WPS menu appears. If you do not want to establish a connection via WPS, select
WPS ÜBERSPRINGEN here.
13.5.1. WPS button
 Select TASTE DRÜCKEN to enable the WPS function to be used via the rout-
er's WPS button.
 Then press the WPS button on the router and press SELECT to confirm the con-
nection with the internet radio.
You can also access the WPS function at any time
ing the INFO button.
To this end, please also note the information in your router's user manual.
• The device will now establish a connection with the network. Once the connec-
tion is successful, a corresponding notice is then displayed.
• The device can now play back media via the network and receive internet radio
stations as long as there is an active internet connection via the network.
• The device stores the connection data so that it does not need to be re-entered
to re-establish the connection.
1 In internet radio mode, you can only use the WPS function via the set-up wizard.
296
1
by pressing and hold-