The Dust Extractor's Operating Position; Lower The Dust Extractor To The Service Position - Husqvarna HTC D80 Manual De Usuario

HTC D80
4.2.1

The dust extractor's operating position

When the dust extractor is in use, it must be in the operating position, see Figure 4-1,
page 15.
Figure 4-1. Operating position
4.2.2

Lower the dust extractor to the service position

The dust extractor can be lowered to the service position by releasing the upper cylinder
section from the lower cylinder section, see Figure 4-2, page 16.
Start with the dust extractor in the operating position, see Figure 4-1, page 15. Then
follow the instruction below:
1.1
Usage
15