Characteristic Curves - Festo EHMB-20 Instrucciones De Utilizacion

EHMB
Size
Note on materials
Materials
Drive shaft
Cover, housing
Drive shaft
Toothed belt
Product weight
100 mm stroke
200 mm stroke
1) With constant travel profile. The specifications apply only when the motor is directly mounted. If a gearbox is also installed, the
repeat accuracy will be different.
2) Dependent on the encoder resolution
3) Output torque less friction is dependent on speed.
4) At maximum rotational speed
5) Cylinder-dependent; values with DSBC-32/40 (with ESBF-32/40, these values must be the limit)
6) Horizontal use (for vertical use and symmetric, not-eccentric configuration up to 15 kg are possible)
Tab. 6
12

Characteristic curves

30
20
Contains paint-wetting impairment substances
Steel
Anodised aluminum
High-alloy stainless steel
Polychloroprene with glass fibre
[kg] 1.72
[kg] 1.85
(at the end of the operating instructions)
25 32
3.35 6.11
3.62 6.39
Festo – EHMB – 1606b English