Safety; Intended Use; General Safety Information; Mounting And Connecting - Festo EHMB-20 Instrucciones De Utilizacion

EHMB
2

Safety

2.1

Intended use

The EHMB rotary/lifting module is intended for turning and lifting payloads (e. g. with grippers).
The EHMB is not permitted for operating conditions in which vegetable and water-soluble greases or
oils can penetrate into the axis. Vegetable greases or oils can reduce the capacity of the toothed belt.
2.2

General safety information

• Take due account of legislative provisions for each intended location.
• Only use the product if it is in its original condition and in perfect working order.
• Use the product only within the defined values (è 11 Technical data and 12 Characteristic curves).
• Take into account labelling on the product.
• Do not make any unauthorised modifications to the product.
• Observe other applicable documents.
• Take into consideration the ambient conditions at the location of use.
• Protect the product during storage and operation from damaging influences. These influences in­
clude:
– Wetness or moisture
– Corrosive coolant or other materials (e.g. ozone)
– UV radiation
– Oils, greases and grease-solvent vapours
– Grinding dust
– Glowing chips or sparks
2.3

Mounting and connecting

• Observe tightening torques. Unless otherwise specified, the tolerance is ±20 %.
2.4

Qualification of specialized personnel

Only qualified personnel may perform installation, commissioning, maintenance and disassembly of the axis.
The qualified personnel must be familiar with installation and operation of electrical and pneumatic control
systems.
Festo – EHMB – 1606b English 19