TO REMOvE HEADREST SEAT COvER
•
Remove backrest and lay flat, facing upwards.
•
Raise headrest to maximum height.
•
Unthread Velcro fabric pieces that pass through the
headrest belt guides. Next, undo the snap on the
back of the headrest. Gently slide the headrest cover
off the shell and foam. Remove the EPE foam insert
from the fabric pocket.
NOTE: WHITE energy absorbing foam pieces are
attached to the plastic shell. However, over
time, they might become unsecured. This is
not a concern as the fabric seatpad will hold
them firmly in place.
TO REMOvE BACKREST SEAT COvER
•
Unhook fabric over the Side Adjustment Support
Knobs. Gently slide the fabric cover off the shell and
foam. Remove back plating from the center piece
using the opening on the back of the pad.
NOTE: WHITE energy absorbing foam pieces are
attached to the plastic shell. However, over
time, they might become unsecured. This is
not a concern as the fabric seatpad will hold
them firmly in place.
21