To Install Backrest Seat Cover - Harmony BABY ARMOR Manual De Instrucciones

•
Attach the two fabric loops at the very bottom of the
headrest fabric to the corresponding plastic extensions
on the bottom of the plastic headrest mechanism
(see illustration).

TO INSTALL BACKREST SEAT COvER

•
Insert the backrest plate back into the slot at the rear
of the backrest seatpad.
•
With the backrest plastic shell lying flat - facing
upwards, ensure that the WHITE energy absorbing
foam pieces are in place on the adjustable side
supports.
•
Slide one side of the fabric pad over the WHITE energy
absorbing foam pieces and plastic shell. Secure in
place by threading the side adjustment knob through
the corresponding hole in fabric. Repeat for other
side.
•
Loop fabric loops at the bottom of the backrest seat
cover over the corresponding left and right 'fork'
assembly.
23