Electrical Requirements - Wolf E Serie Guia De Instalacion

SPE C IF I CAT I ON S

Electrical Requirements

Installation must comply with all applicable electrical codes.
Locate the electrical supply flush with the back wall and
within the shaded area shown in the illustrations on the
following pages. For ease of installation, the electrical
supply for the oven can be placed in an adjacent cabinet
within reach of the conduit.
Performance may be compromised if the electrical supply is
less than 240 volts.
The oven is supplied with a conduit consisting of two
insulated hot lead conductors and a bare ground conductor.
The wiring diagram covering the control circuit is provided
with the oven.
EL EC T R IC A L R EQ UI R EM ENT S — 30 " S I NG L E O V EN
Electrical Supply
Service
Conduit
Total Amps
Max Connected Load
EL EC T R IC A L R EQ UI R EM ENT S — 30 " DO UB LE O V E N
Electrical Supply
Service
Conduit
Total Amps
Max Connected Load
RATING
PLATE
Rating plate location
grounded, 240/208 VAC, 60 Hz
30 amp dedicated circuit
4'
(1.2 m)
21
5.1 kW
grounded, 240/208 VAC, 60 Hz
50 amp dedicated circuit
5'
(1.5 m)
37
8.9 kW
WARNING
The complete appliance must be properly grounded at
all times when electrical power is applied.
Grounding through the neutral conductor is prohibited
for new branch-circuit installations (1996 NEC); mobile
homes and recreational vehicles, or where local codes
prohibit grounding through the neutral conductor.
If aluminum house supply wiring is utilized, splice the
appliance copper wire to the aluminum house wiring
using special connectors design and agency certified
for joining copper and aluminum. Follow the connector
manufacturer's recommended procedure carefully.
Improper connection can result in a fire hazard.
|
wolfappliance.com 5