Electrical Requirements - Wolf E Serie Guia De Instalacion

Specifications

Electrical Requirements

Electrical Requirements
Installation must comply with all applicable electrical
codes.
Locate the electrical supply flush with the back wall and
within the shaded area shown in the illustrations on pages
6-11. For ease of installation, the electrical supply for the
oven can be placed in an adjacent cabinet within reach of
the conduit.
Performance may be compromised if the electrical supply
is less than 240 volts.
The oven is supplied with a conduit consisting of two
insulated hot lead conductors and a bare ground
conductor. The wiring diagram covering the control
circuit is provided with the oven.
ELECTRICAL REQUIREMENTS-Single Oven
Electrical Supply
Service
Conduit
Total Amps
Max Connected Load
ELECTRICAL REQUIREMENTS-Double Oven
Electrical Supply
Service
Conduit
Total Amps
Max Connected Load
grounded, 240/208 VAC,
60Hz
30 amp dedicated circuit
4' (1.2 m)
22
5.4 kW
grounded, 240/208 VAC,
60Hz
50 amp dedicated circuit
5' (1.5 m)
45
10.8 kW
|
wolfappliance.com 5