Installation Instructions; Prepare Cabinet Opening Using Existing Utility Hookups - Haier HDBC100AFS Instrucciones De Instalación

INSTALLATION INSTRUCTIONS

Disconnect electrical power at the fuse box or circuit breaker box
before installing dishwasher.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Turn off water supply.
PREPARE CABINET OPENING USING EXISTING UTILITY
HOOKUPS
•
Follow the steps in this section if you are installing the dishwasher in an existing
cabinet opening with utility hookups.
•
If you are installing the dishwasher in a cabinet opening that does not have
hookups, follow the steps under "Prepare cabinet opening where there are no
existing utility hookups" section
1. Check that the water line reaches to the front left of opening where the water
connection will be made.
2. Check that the direct wire reaches to the front right of opening where the
electrical connection will be made.
If the water line and the direct wire reach far enough
into the opening, proceed to the next section "Install
the drain hose." If they do not reach far enough,
follow the steps under "Prepare cabinet opening
where there are no existing utility hookups."
WARNING
Electrical Shock Hazard
.
water
direct
line
wire
6" (15.2 cm)
9