5
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter a
passcode. The same passcode must be entered in both
devices.
Receive data using Bluetooth connectivity
When you receive data using Bluetooth connectivity, a tone
sounds and you are asked if you want to accept the data.
Accept the data
1
Select Save.
2
Define a file name and location for the data, and select
Save.
USB connections
USB
1
Connect your device to a compatible device with a USB
data cable.
2
Select the USB mode. You can set the device to interact
with Nokia PC Suite on your compatible PC or to appear
as a mass storage drive in PC, Mac, or other device
3
To view or change the USB mode, or to disconnect the
device, open the status area menu.
In the status area,
indicates an active connection.
Use your device as a modem
You can also use your device as a modem and connect your
PC to the internet.
1
Connect your device to your computer, using the USB data
cable.
2
Select
PC Suite
mode.
3
From PC Suite, select Connect to the Internet.
The connection may not be displayed on your device. The
device data counter is updated after you disconnect. When
connected, you can use your computer to monitor the
amount of data sent and received.
You can only establish an internet connection using a cellular
network, and may not be able to use some of the other
communication features when the device is used as a
modem.
Browse the web
About browser
With the Maemo browser, you can view hypertext markup
language (HTML) web pages on the internet. You can also
view web pages that are designed specifically for mobile
devices. These pages use extensible hypertext markup
language (XHTML).
Select
> Web.
To browse the web, you must have an internet access point
configured in your device.
Important: Use only services that you trust and that offer
adequate security and protection against harmful software.
Browse the web
35