Important Safety Notes - Martin Yale Intimus 691 Instrucciones De Uso

GB

IMPORTANT SAFETY NOTES

<< The machine may not be operated by
more than one person at any given time!
The machine was designed for safe
operation by "one person only".
<< During the shredding process no other
work may be performed on the machine
(for example cleaning, etc.).
<< Keep children away from the machine.
This machine's design and safety concept
are based on adult dimensions (feeder
route, safety cut-off switches, etc.) to ensure
that it can be operated safely by adults
only.
<< Repairs may only be performed by
trained personnel.
EXPLANATION OF THE CONTROLS:
1 = Function switch (fig. 1)
(on / off / reverse)
This switch is for the following functions:
- position „IIII"
machine is ready for operation
- position „0"
machine is switched off
- position „bowed arrow"
cutting blades are reversing
2 = Light barrier (forward run) (fig. 1)
The shredding operation is started as soon
as a sheet of paper passes through the feed
slot.
1
fig. 1
<< Keep all loose articles of
clothing, ties, jewelery,
long hair or other loose
objects
opening, injury may
result!
<< Never insert fingers into opening.
Serious injury may result!
<< In case of danger switch the
machine off with the mains switch,
STOP
or with the emergency switch, or
unplug the machine.
<< Always unplug the machine from
the mains power supply before
opening the machine.
OPERATION
The shredder may not be used as a
step ladder or as a seat. Danger of
falling due to breakage!
FEEDING THE PAPER:
- Turn the function switch (1) (fig. 1) in position
„IIII".
- Feed paper through the inlet guide to the cutting
system.
- Machine switches automatically to forward and
draws paper in. The machine switches off
automatically after shredding.
Never feed the shredder with a quantity
of paper exceeding the maximum
indicated in the technical details.
Should the machine be overfed, follow
the instructions under „PAPER JAM".
2
fig. 2
4
SCOPE OF APPLICATION:
The document shredder INTIMUS 155 / 155CC is
a machine for the destruction of common written
away from material.
The unit should only be fed with paper!
Shredding other types of materials can
cause injuries (e.g. by splinters of hard
materials) or may damage the shredder
(e.g. destruction of the cutting system).
INSTALLATION:
- Assemble the unit as per the Assembly
Instructions below.
- Plug in the machine (for instructions for the
necessary precautions see „TECHNICAL
DATA".
The socket outlet shall be installed
near the equipment and shall be easily
accessible!
Only operate the machine in enclosed
rooms at temperatures between 10°C
and 25°C!
EMPTYING THE RECEPTACLE (Fig. 3):
Turn the function switch in position „0". Empty the
receptacle as follows:
- Remove the receptacle from in front of the
machine and empty its contents.
- Replace the empty receptacle under the machine
and push all the way to the back.
Note: The machine will only run when the
receptacle is pushed completely under the
machine.
INITIATION
fig. 3