Adjusting Source Signal Levels - Alpine 3DE-7887R Manual De Operación

1
2
3
22
PWR
INTLZ
FM LV HI
3
MONO
FM LV LO
PWR
INTLZ
Basic Operation
Adjusting Source Signal
Levels
If the difference in volume level between the CD
changer and FM radio is too great, adjust the
FM signal level as follows.
Press and hold the PWR button for at least 3
seconds.
Press the Preset 3 button to select the FM signal
level HI (High) or LO (Low) to make the signal
levels between the FM band and CD changer
closer.
Press the PWR button to cancel the adjusting
mode.
English