Sound Guide Function - Alpine 3DE-7887R Manual De Operación

1
2
3
1
2
3
24
PWR
INTLZ
1
PTY
BEEP ON
BEEP OFF
PWR
INTLZ
PWR
INTLZ
2
NEWS
ACT ON
ACT OFF
PWR
INTLZ
Basic Operation Basic Operation

Sound Guide Function

This function will give audible feedback with
varying tones depending upon the button
pressed.
Press and hold the PWR button for more than 3
seconds.
Press the Preset 1 button and the display
shows "BEEP ON."
Pressing the button again turns the Sound
Guide function off. "BEEP OFF" will be
displayed and no tones will be heard.
Press the PWR button to activate the normal
mode.
ACT Function
Touching the CD magazine during its eject or disc
change cycle can damage the mechanism. To
prevent this, a warning light and beep will activate
while the cycle is in progress. The audible beep may
be disabled leaving only the warning light active.
Press and hold the PWR button for at least 3
seconds.
Press the Preset 2 button to select the ACT ON
or OFF mode.
Press the PWR button to activate the normal
mode.
English