10. Cleaning and Storage
Use an alcohol swab or cotton tissue
moistened with alcohol (70% Isopropyl)
to clean the thermometer casing and
the measuring probe. Ensure that no
liquid enters the interior of the thermo-
meter. Never use abrasive cleaning
agents, thinners or benzene for cleaning
and never immerse the instrument in water or other cleaning liquids.
Take care not to scratch the surface of the probe lens and the LCD.
Remove the battery from the instrument if it is not required for exten-
ded periods of time in order to avoid damage to the thermometer
resulting from a leaking battery.
11. Replacing the battery
The thermometer is supplied with one lithium battery, type CR2032.
Replace with a new CR2032 battery when the flashing battery symbol
appears on the LCD display.
Remove the battery cover by sliding it in the direction shown. Take
out the battery and put in a new one.
12. Guarantee
Subject to the following conditions this high-quality measuring instru-
ment is covered by a 2 year guarantee from the date of purchase.
Warranty claims must be lodged within the guarantee period.
This product was manufactured with the utmost of care according to
international quality standards. Should you have reason for com-
plaints despite this, please send the instrument, accompanied by the
completed Guarantee Card with dealer's stamp as well as original
proof of purchase directly or through your medical supplier to your
closest Microlife Distributor.
Damage resulting from incorrect use is not covered by the guarantee.
Battery and packaging are excluded from the guarantee. Claims
beyond this, including claims for damages, are excluded.
Name and adress of responsible dealer:
11