Warnings For The User; Handling And Transport - CHEFOOK CHAR3 Manual De Instrucciones

➢
Always use personal protective equipment and other means of
protection foreseen by law.
2.2

WARNINGS FOR THE USER

The conditions of the area where the rounding machine is to be
installed must have the following characteristics:
➢
the area must be dry;
➢
the area must have heat sources at an adequate distance;
➢
ventilation and lighting must be suitable and comply with the
hygiene and safety standards foreseen by current laws;
In addition, the user must:
➢ make certain to keep children away from the rounding machine;
➢ follow the instructions in this manual;
➢ always pay careful attention to the work at hand and do not use
the rounding machine absent-mindedly;
➢ perform all operations calmly and with maximum safety;
➢ respect the instructions and warnings displayed on the labels.
The plates are accident prevention devices, and therefore must
always be perfectly legible. If these should be damaged and
illegible, it is mandatory to replace them by requesting
replacements from the Manufacturer.
2.3 WARNINGS FOR THE MAINTENANCE OPERATOR
- Follow the instructions in this manual.
➢ Always use personal protective equipment and other means of
protection.

3 HANDLING AND TRANSPORT

The equipment is provided complete with all of the necessary parts
in a closed package attached to a wooden pallet with straps.
The rounding machine must be unloaded from the transport vehicle,
lifting it with suitable equipment.
To transport the rounding machine to its installation area, use a
rolling cart with an adequate load capacity.
During lifting operations, avoid sudden movements.
Make certain that the lifting devices have a load capacity that is
superior to the weight of the load to be lifted.
40