Scheduled Maintenance; Modify From Single Channel To Dual Channel - Hach PHOSPHAX sc Manual De Instrucciones

6.5 Scheduled maintenance

Description
Reagent pump for sc analyzer (Valve pumps)
Pump head piston pump 10 mL
(Pre-greased cylinder and piston)
Switchable Compressor 115/230V

6.6 Modify from single channel to dual channel

From
1-channel operation
Filter Probe sc
Continuous sampling
English
2. On the controller Test/Maintenance menu, start a cleaning
cycle with distilled water using the Flushing.
3. Clean the canister lid with distilled water.
4. Take the tubing out of the water and start the Flushing function
to pump the tubing and the analysis instrument empty.
5. Wipe the canister lids dry and seal the canisters with the
corresponding lids.
6. Remove the canisters and store them in a frost-free place and
in accordance with local regulations.
7. Isolate the system from the mains and the data network.
8. When using a Filter Probe sc, refer to the Filter Probe sc User
Manual for storage information.
9. Install all transport locks.
10. Depending on the duration, remove the system from its
mounting and wrap the system in a protective film or dry cloth.
Store the system in a dry place.
Table 3 lists items that need to be maintained by service personnel
ONLY. Contact the manufacturer for more information.
Table 3 Repair maintenance items
The sc analyzer can be converted from single channel to dual
channel operation and/or continuous sampling. Contact the
manufacturer for more information. Refer to
configuration options.
Table 4 Conversions
To
2-channel operation
Continuous sampling
Filter Probe sc
When to replace
According to wear
1 year
2 years recommended
With
AMTAX sc, PHOSPHAX sc
AMTAX sc, PHOSPHAX sc
AMTAX sc, PHOSPHAX sc
Maintenance
Warranty
1 year
1 year
2 years
Table 4 for
Conversion kit
LZY170
LZY241
LZY242
15