Hach PHOSPHAX sc Manual De Instrucciones página 7

5.2 Sensor setup menu (fortgesetzt)
Settings (continued)
Reset setup
Last change
Maintenance
Information
Location 1
Location 2
Type
Sensor type
Serial number
Range
Option
Software filtration probe
Software
Loader
Application
Structure
Firmware
Content
Language
Measurement data
Location 1
Gain correction
Date
Location 2
Gain correction
Date
Last dext value
Extinction measurement
Extinction reference
Amplify measurement
Amplify reference
Zero measurement
Offset measurement
Measurement
Reference zero
Offset reference
Reference
Process
Remaining time
List of values
English
Prompt as to whether the factory settings are to be re-applied.
Indication of the last change to a setting on the configuration menu.
Indication of measuring location 1
Indication of measuring location 2 (on two-channel version)
Indication of instrument type
Indication of instrument name
Indication of serial number
Indication of measuring range
Indication of instrument option (filtration probe/1-channel/2-channel)
Filtration probe software (on filtration probe operation)
Instrument software
Detailed information on the software in the instrument
Detailed information on the software in the instrument
Detailed information on the software in the instrument
Detailed information on the software in the instrument
Detailed information on the software in the instrument
List of languages that are supported by the installed language package.
Indicates the correction factor set for correcting the measured values at measuring location 1.
Indicates the date of the last change to the correction factor.
On 2-channel version
On 2-channel version
On 2-channel version
Indication of the delta extinction (EXT MESS-EXT REF) of the last measurement.
Extinction during the last measurement
Extinction during the last zeroing
Measuring amplifier gain factor
Reference amplifier gain factor
Measuring amplifier measured value during zeroing
Measuring amplifier offset
Measuring amplifier measured value during measurement
Reference amplifier measured value during zeroing
Reference amplifier offset
Reference amplifier measured value during measurement
Information what instrument is currently doing (measurement, calibration etc.)
Remaining time for current process, counting down to zero
List of the last 10 measured values
Operation
7