Schlage Control FE410F Instrucciones De Instalación página 7

4b Install the batteries.
5
Install the inside cover.
5a Place the inside cover on the door.
Align the slot with
the tailpiece.
Guide the hole onto
the spindle.
5b Secure the inside cover with two screws.
6
6
6a Install the lever on the inside of the door.
6b Install the lever on the outside of the door.
Thumbturn should
be pointed towards
hinges, with longer
side on top.
7
7a Install the strikes into the frame.
L
Actual Size (2)
Install the levers.
Press lever catch
in, then push lever
into place.
Install the strikes.
Install all the parts shown for maximum security.
Door Stop
Actual Size (4)
Reinforcement Screws: Actual Size (2)
Press lever catch
in, then push lever
into place.
Drill pilot holes
Z\," x 3" deep
2 places