Schlage Control FE410F Instrucciones De Instalación página 8

8
Test the lock.
8a Extend and then retract the bolt using the inside bolt
throw.
Bolt should extend and
retract smoothly.
Outside bolt throw should spin freely until a valid credential is
L
presented.
8b Extend the bolt using the bolt throw and then rotate the
inside lever.
Bolt should retract.
Latch should retract.
8c Rotate the outside lever.
If the lock did not operate as described, please see
Troubleshooting on page 8.
Latch should retract.
9
Set up the lock.
Continue to www.schlage.com to download the Schlage Control
Smart Locks User Guide.
7