Standards And Approvals - Epson TM-H6000III Manual Del Usuario

TM-H6000III Specifications
.
Print method
Print font
Columns
Character size
(W × H)
Character sets
Print speed
Paper dimensions
Paper thickness
Copy capability
Inked ribbon
Ribbon life
Interface (compatible)
Data buffer
Cash drawer function
*1
Power supply
Current consumption
Temperature
Humidity
Overall dimensions
Weight (mass)
*1: Be sure to use a safety-standards-applied power source that meets the following specifications.
Rated output: 24 V/2.0 A or more, Maximum output: 240 VA or less

Standards and Approvals

The following standards are applied only to the printers that are so labeled. (EMC is tested using the
Epson power supplies.)
Europe: CE marking
North America: FCC/ICES-003 Class A
Oceania: AS/NZS CISPR22 Class A
The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards
of this device.
You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation
could void your authority to operate the equipment.
Receipt: Thermal line
Slip: 9-pin serial impact dot matrix
Endorsement: 8-pin shuttle impact dot matrix
Receipt: 9 × 17 / 12 × 24, Slip: 5 × 9 / 7 × 9, Endorsement: 5 × 7
Receipt: 56/42, Slip: 60/45, Endorsement: 40
Receipt: 0.99 × 2.40 mm {0.04 × 0.09"}, 1.41 × 3.39 mm {0.06 × 0.13"}
Slip: 1.56 × 3.1 mm {0.06 × 0.12"}, 1.24 × 3.1 mm {0.05 × 0.12"}
Endorsement: 1.1 × 2.42 mm {0.04 × 0.10"}
95 alphanumeric, 37 international characters
128 × 11 (slip: 12) pages extended graphic characters
Receipt: 63, Slip: 5.14, Endorsement: 1.9 (lines per second)
Receipt: Thermal roll paper 79.5 ± 0.5 × 83 mm {3.1 ± 0.02 × 3.3"}
Slip/endorsement: 70 ~148 × 150 ~ 210 mm {2.8 ~ 5.8 × 5.9 ~ 8.3"} (W × L)
Slip (single-ply): 0.09 ~ 0.2 mm {0.0035 ~ 0.0079"}
Endorsement: 0.09 ~ 0.2 mm {0.0035 ~ 0.0079"}
Receipt/Endorsement: Single-ply
Slip: 1 original + 3 copies
Slip: ERC-32, Endorsement: ERC-41
Slip: 4 million characters
Endorsement: 8000,000 characters
RS-232/Bi-directional parallel/RS-485 (dealer option)
Selectable for 45 bytes or 4 KB using DIP switch
2 drives
+24 VDC ± 10%
Slip: Approximately 1.7 A (mean)
Receipt: Approximately 1.8 A (mean)
Operating: 5 to 45°C {41 to 113°F}
Storage: −10 to 50°C {14 to 122°F}
10 to 90% without condensation
185 × 186 × 298 mm {7.28 × 7.32 × 11.73"} (H × W × D)
Approximately 5.3 kg {11.7 lb}
WARNING
English
iii