Stanley SJ45 Manual De Instrucciones página 21

♦ Impairment of hearing
♦ Risk of personal injury due flying particles.
♦ Risk of burns due to accessories becoming hot during
operation.
♦ Risk of personal injury due to prolonged use.
♦ Risk of dust from hazardous substances.
PERSONAL SAFETY
♦ No children or pregnant women should enter the work
rea where the paint sanding is being done until all
cleanup is completed.
♦ A dust mask or respirator should be worn by all persons
entering the work area. The filter should be replaced
daily or whenever the wearer has difficulty breathing.
Note: only those dust masks suitable for working with lead
paint dust and fumes should be used. Ordinary painting
masks do not offer this protection. See your local hardware
dealer for the NIOSH approved proper mask.
LABELS ON TOOL
The label on your tool may include the following symbols:
WARNING! To reduce the risk of injury, the user
must read the instruction manual before use.
Wear ear protection.
Wear safety glasses or goggles.
V Volts
A Amperes
Hz Hertz
W Watts
min minutes
Alternating
Current
Position of Date Code (Fig. A)
The Date Code, which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
PACKAGE CONTENTS
1 Jigsaw
1 Blade
1 Instruction manual
1 Wrench
1 Warranty card
1 Service Center List
Direct Current
n No-Load Speed
0
Class II Construction
Earthing Terminal
Safety Alert Symbol
Revolutions or
/min. Reciprocation per
minute
♦ Check for damage to the tool, parts or accessories
which may have occurred during transport.
♦ Take the time to thoroughly read and understand this
manual prior to operation.
FEATURES (FIG. A)
This tool includes some or all of the following features.
1. Trigger switch
2. Lock-on button
3. Speed controller
4. Dust cover
5. Blade clamp actuator
6. Blade clamp
7. Saw blade
8. Pendulum Stroke selector
9. Shoe plate
10. Dust extraction outlet
11. Wrench
12. Screw-blade clamp
13. date code
14. Vacuum nozzle (optional)
15. Screw-shoe plate
16. Cutting line
17. Rip fence (optional)
18. Screw (optional)
19. Clamp bar (optional)
ELECTRICAL SAFETY
Only one voltage is applicable to this tool. Be sure to
check that the power supply corresponds to the
voltage on the rating plate.
Your Stanley tool is equipped with double insulation, hence,
it does not require to be earthed
When the power cord is damaged, have it sent to a
STANLEY service center for replacement to specially
prepared cables.
USING AN EXTENSION CABLE
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm2;
the maximum length is 30 m. When using a cable reel,
always unwind the cable completely.
ASSEMBLY AND ADJUSTMENT
WARNING! To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. Before reconnecting
the tool, depress and release the trigger switch to ensure
that the tool is off. An accidental start-up can cause injury.
ENGLISH (
Original Instructions)
21