Use Of Accessories; Cutting / Roughing Discs; Flap Discs For Metal; Other Accessories - Parkside PWS 1200 Instrucciones De Utilización Y De Seguridad

Use of accessories

Cutting / roughing discs

You can use the following cutting or roughing/
grinding discs with this device:
Dimensions:
Speed:
Circumferential speed: 80 m / sec
ø 125 x 22,2 mm
max. 6 mm Dicke
(gekröpft)
12000 U/min
80 m/sec

Flap discs for metal

Dimensions:
Speed:
ø 125 x 22,2 mm
to max. 6 mm thick
(depressed centre)
12,000 rpm
ø 125 mm
min. 12,000 rpm

Other accessories

You can also use abrasive consumables and tools
complying with the following technical specification:
Spindle thread:
Speed:
Backing plate for grinding discs
Dimensions:
Grinding discs for wood / masonry attached
with hook and eye fixings
Dimensions:
Note! These may only be used in combination
with a backing plate!
Cup brush, crimped wire
Dimensions:
Use of accessories
M14
min. 12,000 rpm
ø 115 mm / 125 mm
ø 115 mm / 125 mm
ø 75 - 100 mm
GB/MT 37