Sauder Carson Forge 415117 Manual De Usuario página 16

Step 11 Step
Insert a SLIDE CAM (10A) into the LARGE DRAWER SIDES (D132 and D138).
å
Fasten a DRAWER RIGHT (40DC) to the LARGE RIGHT DRAWER SIDE (D132) and a DRAWER LEFT (40DD) to the
å
LARGE LEFT DRAWER SIDE (D138). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
NOTE: The glides are not intended to rotate.
å
Repeat this step for the remaining drawers.
å
2
Page 16
Glide end
10A
1
D138
VIEW THE DRAWER GLIDE VIDEO
3S
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
415117
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D132
2
www.sauder.com/services
Glide end
1