Latch - Graco Smart Seat Manual Del Propietário

1. Test base for secure installation. See
B
2. Push in and rotate knobs
restraint to unlock position.
3. Place on base in forward-facing position
4. Rotate knobs on both sides to lock seat to base
You will see lock symbols in windows on side of base
H
as shown .
5. If you see the red flags up in the child restraint
F
seating area and you see the unlock symbol
then seat is not secured to base.
6. Check seat is secure by moving front to back and left
to right at the belt path
more than 1 inch ( 2.5 cm). If belt loosens or
lengthens, repeat procedure.
NOTE:
Note: See
A
.
C
on both sides of child
D
G
. Base should not move

LATCH

LATCH
to attach tether.
36
.
E
.
I
A
D
F