Installation - Graco Smart Seat Manual Del Propietário

Ocultar thumbs Ver también para Smart Seat:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All LATCH seating positions have tether anchors.
Always use tether if a vehicle tether anchor is
available in forward-facing mode with harness. Check
your vehicle owner's manual for the tether anchor
location(s). If your vehicle is not equipped with a tether
anchor, it may be possible to install one. Contact your
vehicle dealership for the proper anchor location and

installation.

NOTE: TETHER NOT TO BE USED IN
REAR-FACING MODE.
1. Check that tether is securely attached to child
restraint.
2. Fasten tether clip to anchor point
3. Tighten adjustment belt to remove any slack
4. To loosen, push button while pulling on the belt
C
as shown
.
A
.
B
.
38
38
A
B
C

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido