Dc A Zero; Low Pass Filter; Inrush Current - Amprobe AMP-25 Manual De Usuario

DC A ZERO (DC A and Auto DC/AC A mode)
Press /
from the display and establish a baseline for DC A.
0A

Low Pass Filter

Press button to activate Low Pass Filter mode ("LPF"
is displayed).
Press a second time , the Meter goes into Inrush mode
(INRUSH is displayed). Press again to exit the function.

Inrush Current

Press button to enter Low Pass Filter mode (LPF is
displayed) first. Press a second time to enter Inrush mode
("INRUSH" is displayed). Press again to exit the function.
The Meter calculates the RMS value for 100ms when
detecting a current above 5A.
button > two second to clear DC A reading
100A/1KHz
Press
9
LPF