Maintenance And Repair - Amprobe AMP-25 Manual De Usuario

MAINTENANCE AND REPAIR

If the Meter fails to operate, check battery, test leads, etc.,
and replace as necessary.
Double check the following:
1. Replace the fuse or battery if the meter does not
work.
2. Review the operating instructions for possible
mistakes in operating procedure.
Except for the replacement of the battery, repair of the
meter should be performed only by a Factory Authorized
Service Center or by other qualified instrument service
personnel.
The front panel and case can be cleaned with a mild
solution of detergent and water. Apply sparingly with a
soft cloth and allow to dry completely before using. Do
not use aromatic hydrocarbons, gasoline or chlorinated
solvents for cleaning.
16