BATTERY REPLACEMENT
When battery voltage drops below the value required for
proper operation, the battery symbol (
Warning
W
To avoid shock, injury, or damage to the Meter, disconnect
test leads before opening case.
Replacing BATTERY follow below steps:
1. Remove the Meter from measuring circuit.
2. Turn the Meter to OFF position.
3. Remove the screw from the battery cover and open
the battery cover
4. Remove the batteries and replace with two 1.5 V
batteries (LR44). Observe correct polarity when
installing the batteries.
5. Put the battery cover back and re-fasten the screw.
Battery: 2 x 1.5 V (LR44)
17
) appears.
3
4