Johnson Controls York EKKC-12 AA Instrucciones De Instalación página 15

Precautions Precautions
1. Incorrect tightening can cause problems, 1. Incorrect tightening can cause problems,
as shown in Fig. 13. as shown in Fig. 13.
AIR LEAK AIR LEAK
CONDENSED WATER LEAK CONDENSED WATER LEAK
AIR LEAK AIR LEAK
FROM CEILING FROM CEILING
Fig. 13 Fig. 13
2. If any clearance is left between the ceil- 2. If any clearance is left between the ceil-
ing and the front panel after tightening, ing and the front panel after tightening,
readjust the height of the indoor unit, as readjust the height of the indoor unit, as
shown in Fig. 14. shown in Fig. 14.
NO CLEARANCE ALLOWED NO CLEARANCE ALLOWED
It is possible to adjust the height of the indoor unit by It is possible to adjust the height of the indoor unit by
tightening at the corners of the front panel if the indoor tightening at the corners of the front panel if the indoor
unit is level. This does not affect the connections. unit is level. This does not affect the connections.
* After fastening the unit, make sure there is no * After fastening the unit, make sure there is no
clearance between the unit and the ceiling. clearance between the unit and the ceiling.
Fig. 14 Fig. 14
3. Connecting the front panel. 3. Connecting the front panel.
FRONT FRONT
INDOOR INDOOR
PANEL PANEL
UNIT UNIT
(6) Fasten the 2 front panel connectors to the unit. (6) Fasten the 2 front panel connectors to the unit.
GB GB
INDOOR INDOOR
UNIT UNIT
Fig. 15 Fig. 15
FRONT FRONT
PANEL PANEL
15 15