Installation And Start-Up; Room Temperature - Vestfrost VT78 Instrucciones Para El Uso

GB

Installation and start-up

Placement
For safety and operational reasons, the
appliance must not be installed outdoors.
The appliance should be placed on a
stable, level surface in a dry, well-ventilated
room (max. 75% relative air humidity).
Never place the appliance close to sources
of heat such as radiators, and avoid placing
it in direct sunlight.

Room temperature

The climate class is stated on the
nameplate (see page 10). This specifies the
optimum room temperature.
Climate Optimum room
class temperature
SN +10 ºC to +32 ºC
N +10 ºC to +32 ºC
ST +16 ºC to +38 ºC
T +16 ºC to +43 ºC
Ventilation
It is important that the appliance be
well ventilated and that air can circulate
unhindered above, below and around it.
Figure 2 illustrates how the necessary air
circulation can be ensured.
There must be at least 15 mm clearance
between the base of the appliance and the
floor.
IMPORTANT! There must be free access to
the ventilation grille (fig. 3).
6
fig. 2
fig. 3