Cleaning And Maintenance; Save Energy - Vestfrost VT78 Instrucciones Para El Uso

Cleaning and maintenance

Cleaning
Before cleaning, disconnect the power sup-
ply and remove all loose fittings.
The appliance is best cleaned using luke-
warm water with a little mild, perfume-free
detergent. Never use cleaning agents that
scour. Use a soft cloth. Rinse with clean
water and dry thoroughly. It is important
to prevent water from entering the control
panel.
The sealing strip around the lid must be
cleaned regularly to prevent discolouration
and prolong service life. Use clean water.
After cleaning the sealing strip, check that it
continues to provide a tight seal.
It is recommended that the wire and tubular
condensers on the rear of the appliance be
cleaned.
The ventilation grille must also be kept free
of dust and dirt. Clean it with a vacuum
cleaner.
If the appliance is not to be used for any
length of time, switch it off, (see page 7)
disconnect the power supply, empty it, clean
the inside and leave the lid open to allow air
circulation and prevent smells.

Save energy

● Keep the lid closed as much as possible.
● Check regularly that the lid closes tightly.
● Position the freezer in a cool (min. 5°C),
well-ventilated room.
● Defrost the freezer before the layer of ice
becomes excessively thick.
9
GB