Operation and function
The appliance is equipped with electronic controls (fig. 4).
For operation of the electronic control, reference is made to
the separate instruction manual enclosed in the appliance.
Additional information
NOTE: The first time the power is connect-
ed, press the "A" (Fig. 4), thereby the alarm
will be connected
The appliance is equipped with a battery
back-up. The alarm will automatically go off
by power supply failure.
Therefore it is important to disconnect the
alarm, in case the appliance is not to be
used for a period.
Set the alarm off by pressing the "A" (fig. 4),
and display shows "OFF", and then discon-
nect the power supply.
Port hole
Some models has a predrilled hole at the
back side. Useful in case CO
introduction of wire sensor may be required.
.
7
GB
A
fig. 4
back up or
2