GE ASH08 Manual Del Propietario E Instrucciones De Instalación página 12

Window Installation Instructions
REMOVE THE FRONT GRILLE
3
(IF ATTACHED)
B
Pull the bottom grille
corners out to release
the lower tabs on
each side.
NOTE: Do not pull the
bottom edge toward
you more than 3" or
you may damage the tabs of the grille.
Lift the grille up and off the top tabs.
C
REMOVE THE AIR CONDITIONER
4
FROM THE CASE
Remove the 2 screws on each side of the
A
case. Keep these for later use.
Front of air conditioner
Slide the air conditioner from the case by
B
gripping the base pan handle and pulling
forward while bracing the case.
Front of air conditioner
Remove packing cardboard and tape,
if present.
(cont.)
5 PREPARE THE CASE
A
Remove the backing from the top mounting
rail seal strip and attach it to the bottom of
the top mounting rail.
B
Install the top mounting rail with 4 type A or
5 type A screws (as the installation requires)
from the outside of the case.
Top mounting rail
C
Insert the frames for the accordion panels
into the top and bottom mounting rails.
Attach the accordion panels to the side of
the case using 6 type A screws.
12
Bottom mounting rail