Use And Care Instructions; System Requirements - Brizo Pascal 64900 Serie Manual De Usuario

Installing the Dispenser:
10
Separate head (1) from body assembly (2).
Make sure gasket (3) is properly seated in
the base of the body assembly. Insert body
assembly through selected hole in sink.
Secure body assembly to sink with nut (4).
From under the sink screw the bottle (5)
into the body assembly shank. Insert
pump (6) down into the body assembly,
then attach head assembly (1) to pump.
Note: To fill, lift the head and pump
assembly out of the bottle and pour
not more than 8 oz. into bottle. DO NOT
remove the bottle each time as this weak-
ens the neck. Use a funnel to help prevent
spills. Pull pump and head assembly out
occasionally to soak and pump warm water
through pump to remove soap build-up.

Use and Care Instructions:

The Brizo ® Pascal Culinary Faucet is designed for easy use and maintenance. Following these
instructions will help maintain the life of the system.

System Requirements:

The system requires power supplied by the enclosed AC/DC transformer or by 4 D cell batteries.
Battery life is approximately two years, depending on usage habits.
To change the batteries, see page 16.
When the handle is in the off position, all electronics are shut off. The electronics will turn on when
the handle is rotated approximately 5 degrees in the on position. Battery life can be extended by
placing the faucet handle in the off position when not in use.
12
1
6
2
3
4
5