Product Features; Technical Data; Noise/Vibration Information - Bosch GKT 55 GCE Professional Manual Original

16 | English
The power tool must not be used to cut ferrous metals.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Lock-off switch for on/off switch
(3) Lever for saw blade change
(4) Auxiliary handle (insulated gripping surface)
(5) Hex key
(6) Cutting depth scale
(7) Base plate
(8) Adjustable cutting depth indicator
(9) Scale for mitre/bevel angles
(10) Wing bolt for parallel guide
(11) Wing bolt for mitre/bevel angle preselection
(12) Button for mitre/bevel angle 47°
(13) Adjustable viewing window for dust extraction
a)
(14) Parallel guide
(15) Protective guard
(16) Button for mitre/bevel angle -1°
(17) Wing bolt for mitre/bevel angle preselection
(18) Chip ejector
(19) Handle (insulated gripping surface)
(20) Clamping bolt
(21) Clamping flange
a)
(22) Circular saw blade
(23) Mounting flange
(24) Speed preselection thumbwheel
(25) Spindle lock button
(26) Saw spindle
(27) Slider for preselecting the cutting depth
a)
(28) Pair of screw clamps
a)
(29) Guide rail
a)
(30) Connector
a)
(31) Extraction hose
(32) 0° cut mark
(33) 45° cut mark
(34) Plastic insert for base plate
(35) Knurled screw for guide groove clearance setting
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical data

Hand-held circular saw
Article number
Rated power input
1 609 92A 6HM | (10.05.2021)
a)
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/vibration information

Noise emission values determined according to
EN 62841-2-5.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 92 dB(A); sound power level
103 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-5:
Sawing wood: a
Sawing metal: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
GKT 55 GCE
not actually being used should also be taken into account.
3 601 F75 0..
This may significantly reduce vibration and noise emissions
over the total working period.
W 1400
Hand-held circular saw
No-load speed
Max. speed under load
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Spindle lock
Speed preselection
Constant electronic control
Starting current limitation
Base plate dimensions
Max. saw blade diameter
Min. saw blade diameter
Max. base blade thickness
Max. tooth thickness/offset
Min. tooth thickness/offset
Locating bore
Weight according to
EPTA-Procedure 01:2014
Protection class
(triax vector sum) and uncertainty K
h
2
< 2.5 m/s , K = 1.5 m/s
h
2
< 2.5 m/s , K = 1.5 m/s
h
GKT 55 GCE
-1
min 3600–6250
-1
min 5900
mm 57
mm 42
●
●
●
●
mm 154 x 305
mm 165
mm 160
mm 1.8
mm 2.6
mm 1.8
mm 20
kg 4.7
/ II
2
2
Bosch Power Tools