Metra 99-3015G Instrucciones De Instalación página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DDIN radio provision
1. Connect the radio brackets to the
radio housing trim panel with the
(4) #8 x 3/8" Truss-head Phillips
screws supplied. (Figure A)
2. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS. Test everything.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
Kit Assembly
(Figure A)
99-3015G
(Figure B)
6

Publicidad

Tabla de contenido
loading

Tabla de contenido