Kit Assembly - Metra 99-3015G Instrucciones De Instalación

If the optional AX-LCD screen is
being installed:
1. Insert the LCD housing into the
radio housing from the back.
(Figure A)
2. Insert the LCD into the radio
housing, route the cable through
the back plate and then mount the
back plate using the (2) supplied
Truss-head #8 x 3/8" Phillips
screws. (Figure A)
Note: When installed, the AX-LCD
screen provides access to the vehicles
Personalization Menu. See the vehicle
owner's manual for more information
If the LCD will not be used, snap the
pocket in from the front of the radio
housing. (Figure A)
Attach the (3) included plastic snaps to
the trim panel bracket and then snap
the bracket onto the top of the radio
housing trim panel.
Continued on next page

Kit Assembly

Pocket
(Figure A)
99-3015G
AX-LCD screen steps 1-2
Option
4