Dash Disassembly - Metra 99-3015G Instrucciones De Instalación

1. Unsnap panel above radio screen.
(Figure A)
2. Unsnap and remove the trim panel
on the outer driver's edge of dash.
(Figure B)
3. Remove (1) screw from left side
of panel below steering column
(panel does not need fully
removed) (Figure C)
(Figure A)

Dash Disassembly

(Figure B)
(Figure C)
99-3015G
4. Unsnap and remove center
console cover. (Figure D)
5. Unsnap and remove panel above
glove box. (Figure E)
Continued on next page
2
(Figure D)
(Figure E)