Rear-Facing Installation With Vehicle Seat Belts - Graco MySize Manual De Usuario

REAR-FACING INSTALLATION WITH VEHICLE SEAT BELTS

WARNING
LATCH belts MUST be stored when
using vehicle seat belt to install child
restraint.
Please refer to p.41, "Vehicle Seat Belts"
to determine what type of vehicle seat
belt is in your vehicle.
1. Store rear-facing
LATCH belt as shown (a). Pull out on
handle on front of child restraint (b)
and adjust to
2. Place rear-facing
3. Thread vehicle seat belt through
rear-facing openings under the seat
pad and buckle belt (d). DO NOT pass vehicle belt over top of the seat pad.
Press down firmly in center of child restraint to compress vehicle seat cushion
while tightening vehicle seat belt (e).
and forward-facing
rear-facing position
on vehicle seat.
a
c
1 (c).
e
24
b
d