Ferroli BlueHelix HiTech RRT H Instrucciones De Uso, Instalación Y Mantenimiento página 317

BlueHelix HiTech RRT H
Accessing the electrical terminal block and fuse
Remove the front panel ( *** 'Opening the front panel' on page 332 ***) to access the terminal block
(M) and fuse (F) by proceeding as follows ( and fig. 28). The terminals indicated in must be
with voltage-free contacts (not 230V). The arrangement of the terminals for the various connec-
tions is also given in the wiring diagram in fig. 65.
10kOhm
1.8kOhm
Variable output relay card LC32 (optional - 043011X0)
The variable output relay LC32 consists of a small card with a switchover of free contacts (closed
means contact between C and NO). Operation is managed by the software.
For installation, carefully follow the instructions provided in the kit package and on the wiring dia-
gram of fig. 65.
EN
fig. 28
fig. 29
cod. 3541V480 - Rev. 00 - 04/2021
F
317