Operating Instructions; Introduction; Control Panel - Ferroli BlueHelix HiTech RRT H Instrucciones De Uso, Instalación Y Mantenimiento

BlueHelix HiTech RRT H

1. Operating instructions

1.1 Introduction

Dear Customer,
BlueHelix HiTech RRT H is a high-efficiency, low emissions premix condensing heat generator
with heat exchanger in s/steel and incorporated DHW production, using Natural Gas (G20), Liq-
uefied Gas (G30-G31) or Propane-Air (G230) and equipped with a microprocessor control sys-
tem.
The sealed chamber unit is suitable for indoor installation or outdoors in a partially protected
place (according to EN 15502) with temperatures to -5°C.
The boiler is arranged for connection to an external storage tank for hot water (op-
A
tional). In this manual all the functions relevant to domestic hot water production
are only active with the optional hot water tank connected as indicated in sec. 2.3

1.2 Control panel

Panel legend fig. 1
DHW temperature setting decrease
1
button
DHW temperature setting increase but-
2
ton
Heating system temperature setting de-
3
crease button
Heating system temperature setting in-
4
crease button
Display
5
Return button
6
EN
5
1.2
8
14
45
14
25
4
3
6
7
fig. 1- Control panel
cod. 3541V480 - Rev. 00 - 04/2021
12
10
bar
9
°C
13
°C
11
2
1
"Winter", "Summer", "Unit OFF", "ECO",
7
"COMFORT" mode selection button
Eco mode ( )
8
DHW mode
9
10 Summer/Winter mode
11 Menu / confirm button
12 System pressure
13 Heating mode
14 Burner lit
297