Master Forge BG1793B-A Manual De Instrucciones página 15

NATURAL GAS CONVERSION
3. Adjust the air shutters of the main
burners by loosening the air shutter
screws with the Phillips screwdriver
(DD).
Hardware Used
Phillips
DD
Screwdriver
4. Remove the LP orifices of all the main
burners with the orifice removal tool (CC)
and install the 1.45mm orifices (FF).
Hardware Used
Orifice
CC
Removal Tool
1.45mm Orifice
FF
5. Remove the 6 screws at the back of
burner box with the Phillips screwdriver
(DD). Detach the rotisserie burner cover
from the rear panel of burner box.
During this step, keep a firm hold on the
rear burner cover. Otherwise, it will drop
and may break, possibly causing injury.
Hardware Used
Phillips
DD
Screwdriver
3
x 1
4
x 1
x 3
5
x 1
15
CC
FF
Rear Burner
Cover