Gas Installation - Master Forge BG1793B-A Manual De Instrucciones

OPERATING INSTRUCTIONS
L.P. GAS INSTALLATION
Gas grills that are set to operate with L.P. gas come with a high capacity hose and regulator assembly.
(Note: Only use the pressure regulator and hose assembly supplied with the grill or a
replacement pressure regulator and hose assembly specified by the manufacturer). This
assembly is designed to connect directly to a standard 20 lb. L.P. cylinder. L.P. cylinders are not
included with the grill. L.P. cylinders can be purchased separately at an independent dealer.
Connecting a Liquid Propane Gas Tank to the Grill:
1. Open the doors of the cabinet. Turn the stopper of the tank tray clockwise and pull out the
tank tray. Place a 20 Ib. tank with foot ring into the tank tray. See Fig. 4.
Make sure the tank valve is in the
OFF position.
2. Tighten the retention screw in front
of the tank tray to secure the tank.
Fig. 4
Push the tank tray to the end and lock
it by turning the stopper back counter-
clockwise. See Fig. 5.
3. Check the tank valve to ensure it
has proper external mating threads to
fit the hose and regulator assembly
provided (Type 1 connection per ANSI
Z21.58-2015).
4. Inspect the valve connection port of
the regulator assembly. Look for
damage or debris. Remove any debris.
Inspect hose for damage. Never use
damaged or plugged equipment.
5. Make sure all burner knobs are in
the OFF position.
20