Master Forge BG1793B-A Manual De Instrucciones página 31

CARE AND MAINTENANCE
Definitions:
(+) Guard – Guard is a portion of portable luminaries unit that prevents inadvertent contact with
the bulb. It may be integrated with the UV filter or lamp containment barrier or as part of an
enclosure or shade.
(+) Lamp containment barrier – lamp containment barrier is a portion of a portable luminaries
unit that encloses the bulb.
(+) UV filter – UV filter is a portion of a portable luminaries unit that limits ultraviolet (UV)
emissions.
1. Make sure the light's power switch on the
control panel is in the "OFF" position and power
plug is disconnected from outlet.
2. Use a screwdriver to loosen the screw
securing the burner box rear panel.
During this process, hold the lamp screen;
otherwise, it will fall and break, potentially
causing bodily harm. (Fig. 10)
3. Remove the lamp screen. (Fig. 11)
4. Pull out the light bulb and replace with a new
bulb. (Fig. 12)
5. Reverse the instruction from steps 4 - 1 for
installation.
Cleaning Method
Follow Steps 1 - 3 above for glass cover removal. Use a damp towel to clean the surface of
glass cover. Make sure the glass cover is completely dry before re-installing.
!
WARNING
Make sure the light switch is on "OFF" position and power plug is disconnected from
power outlet prior to cleaning the glass cover.
Fig. 10
Fig. 11
Fig. 12
Bulb
31
Lamp Screen