Operating Instructions - Master Forge BG1793B-A Manual De Instrucciones

OPERATING INSTRUCTIONS

Never attach an unregulated gas line to the appliance. Connection to an unregulated gas
line can cause excessive heat or fire.
Verify the type of gas supply to be used, either Natural Gas (N.G.) or Liquid Propane (L.P.), and
make sure the serial plate agrees with that of the supply. Conversion kits are available
separately for an additional cost which will enable you to convert your grill from L.P. to N.G. or
to convert your grill from N.G. to L.P. Please see your local dealer for more information.
Always have a qualified service technician perform difficult conversions or
modifications.
For natural gas installations, an installer must supply a gas shutoff valve that is easily
accessible to the grill. All installer supplied parts must conform to local codes, or in the absence
of local codes, with the National Electrical Code, ANSI/NFPA 70- 2011, and the National Fuel
Gas Code, NFPA 54-2015/ANSI Z223.1-2015.
All pipe sealants must be an approved type and resistant to the actions of L.P. gases. Never
use pipe sealant on flare fittings. All gas connections should be made by a competent qualified
service technician and in accordance with local codes and ordinances. In the absence of local
codes, the installation must comply with the National Fuel Gas Code, NFPA 54-2015/ANSI
Z223.1-2015. Gas conversion kits may be purchased separately. When ordering gas
conversion kits, have the model number and the type of gas (N.G. or L.P.) used for your grill.
This grill must be isolated from the gas supply piping system by closing its individual manual
shut-off valve during any pressure testing of the gas supply piping system at test pressures
equal to or less than 1/2 PSI (3.5 kPa.).
The installation of this grill must conform with local codes, or in the absence of local codes, with
National Fuel Code, NFPA 54-2015/ANSI Z223.1-2015.
Installation in Canada must be in accordance with the Standard CSA B149.1-2015 or
B149.2-2015 (installation code for gas burning appliances and equipment) and local codes.
19