illy Francis Francis X1 Manual De Instrucciones página 40

descaling
1
flashing - WHITE
The formation of limescale is a natural consequence of using of the machine.
The machine features an automatic program designed to optimise cleaning and remove limescale residues
from inside the machine.
Note: use only descaling products intended for coffee machines.
Note: please follow the procedure described below, not the instructions on the label of the descaling pro-
duct.
If the machine indicator LED flashes (WHITE) (5 flashes per minute)
Starting the procedure:
2
- Take out and fill the tank with 1 liter of water (up to the MAX level)
- Introduce the descaling product supplied with the machine; wait for it to dissolve.
- Remove the capsule and capsule holder.
- Place an empty container with a capacity of at least 1 liter beneath the brew group
- Keep the coffee and steam switches pressed down simultaneously for at least 5 seconds
will start flashing (BLuE and RED)
36
2
1
, carry out the following steps:
3
6
.
3
.
4
.
5
; the LEDs
4
1 LITER
5
6
flashing