Perry Easy Program Instrucciones De Instalación, Programación Y Modo De Empleo página 33

When OK is pressed (fig. 18) to confirm, the program set for Monday is saved in the
memory and the dash beneath Tuesday 2
to the time 0:00 , above the temperature range for the previous day (fig. 19).
Setting the temperatures for Tuesday.
Press OK (fig. 19) to apply the same temperature range as for Monday: the same range
will be set for Tuesday and the dash pertaining to
digits corresponding to the time 0:00
If the same temperature range is NOT
described for Monday.
Note: the keys can be used to move rapidly to the subsequent or previous time
that is to be reset on the temperature range; the corresponding time is shown on the
display).
Having set the temperature settings for
complete the daily profile for each day of the week otherwise the setting cannot
be saved.
Once the temperature profile is set for
to Monday's (1) settings, then press OK once again for 4 seconds
operation saves the complete weekly program.
The following will appear on the display: the dash pertaining to the current day beneath
the corresponding number, the room temperature and the 24-hr temperature range
programmed with the current time digit blinking.
The chronothermostat is working.
( ) will blink together with the digits pertaining
Wednesday will blink together with the
.
required, proceed by pressing t1, t2, t3, t
Tuesday press OK to confirm.
Sunday 7 ( ) press, OK (fig. 20) to save and return
as
You must
(fig. 21); this
G
B
33